LUBRICANT - PARKER SUPER O-LUBE - SLUBE 884-2

Product Image
PRODUCT CLASS: LUBRICANT - PARKER SUPER O-LUBE - SLUBE 884-2
DESCRIPTION:

Order Parker Super O-Lube SLUBE 884-2, a 2oz tube of all purpose high viscosity silicone oil (not a grease) that can be used as an O-Ring lubricant during assembly to limit installation damage. Super O-Lube can be used with all rubber O-Ring materials, but only use a thin film of Super-O-Lube with silicone rubber to prevent O-Ring seal damage.
DOWNLOAD: SDS-Parker-Super-O-Lube-Slube-2017.pdf
QUANTITY:
Please Enter 1 or More Quantity for Pricing
   
 

Order Parker Super O-Lube SLUBE 884-2, a 2oz tube of high viscosity silicone oil (not a grease) that can be used as an O-Ring assembly lubricant to limit installation damage as well as improve high pressure or vacuum system performance. Super O-Lube inert nature lends itself to a wide variety of fluid systems. And since there are no fillers, there is no clogging of micron filters. Parker Super O-Lube can also protect ozone sensitive O-Ring and Seal polymers that require age control.

 Parker SUPER O-LUBE 884-2 2oz Tube

 

General Features:
• Heat resistance – up to 204°C (400°F)
• Cold flexibility – Down to -54°C (-65°F)
• High viscosity
• All purpose
• Not easily washed away
• Provides protection to age sensitive polymers
• Inert nature lends itself to wide variety of fluid systems
• Adheres with unusual tenacity
• Highly moisture resistant
• Will not clog 30-micron filters

Compatible with:
• Epichlorohydrin
• Fluorocarbon
• Fluorosilicone
• HiFluor
• Neoprene
• Nitrile
• Perfluoroelastomer
• Polyacrylate
• Polysulfide
• Polyurethane
• Butadiene
• Butyl
• Ethylene Propylene
• Polyisoprene
• SBR (GRS)
• Silicone1

1 Silicones require special consideration. Use only a thin film or Super O-Lube on silicone rubber if the temperature will exceed 300°F.

*There are certain situations that may exist where Parker O-Lube would not be the best recommendation. For guidance in handling these unique situations, contact our Engineering team.